Radreise & Fernradler Forum
Radreise & Fernradler Forum
Wer ist online?
2 Mitglieder (MichiV, 1 unsichtbar), 287 Gäste und 839 Suchmaschinen sind im Forum unterwegs.
Details
Erweitert
Rund ums Forum
Regeln
Die Regeln für dieses Forum
Nutzungsbedingungen
Vereinbarungen für die Benutzung
Das Team
Wer steht hinter dem Forum?
Verifizierung
Offenlegung deiner Identität
Beteiligte Homepages
Radreise-Seiten, die das Forum eingebunden haben
Mach mit!
Dieses Forum für deine Homepage
RSS Feeds RSS
Eine Übersicht öffentlicher RSS Feeds
Plauderecke
Zum Unterhalten und Plauschen
Die Geschichte
Die Geschichte des Forums
Spende
Unterstütze das Forum
Radreise-Wiki
Partnerseiten
Statistik
29207 Mitglieder
97624 Themen
1532679 Beiträge

In den letzten 12 Monaten waren 2220 Mitglieder aktiv. Die bislang meiste Aktivität war am 02.02.24 17:09 mit 5102 Besuchern gleichzeitig.
mehr...
Vielschreiber (30 Tage)
veloträumer 60
Keine Ahnung 53
Falk 53
Juergen 51
iassu 45
Themenoptionen
#1360013 - 29.10.18 08:25 Re: Dynamo Voltage (possible) Hazard [Re: derSammy]
ConRAD
Mitglied
Themenersteller
abwesend abwesend
Beiträge: 263
Hi derSammy, thanks for your reply.
Yes I agree with you, at 50 km/h is definitely much better to keep both the hands on the handlebar !!
Here below nevertheless some of my points:
A bike dynamo is a constant current source till the load is a prevalent resistive load and its value is negligible compared to the internal reactance of the dynamo; 500-600 mA is the maximum output you can get from a dynamo, even at 100 km/h on a dead short-circuit load !!
Yes I confirm: no-load voltage is something like ~1V per km/h.
A 6V-3W hub dynamo is capable of delivering 6W at 20 km/h, 10 W at 50 km/h.
Output voltage of a dynamo of course is likely to drop with load but the typical 1500 Ohm of a human body will not affect substantially this value at all.
... sometimes just a few mA can kill and that's why worldwide households electrical protection, at least against "indirect contacts", has been generally specified to be put in place through the installation of a good grounding system in combination with a 30 mA RCD-Residual Current Device.
The IEC frown plot below shows that 100 mA for 1 sec might be lethal.
Cheers

Nach oben   Versenden Drucken


Alle Beiträge zum Thema
Betreff von verfasst am
Dynamo Voltage (possible) Hazard ConRAD 28.10.18 18:12
Re: Dynamo Voltage (possible) Hazard derSammy 28.10.18 21:03
Re: Dynamo Voltage (possible) Hazard ConRAD 29.10.18 08:25
Re: Dynamo Voltage (possible) Hazard derSammy 29.10.18 20:26
Re: Dynamo Voltage (possible) Hazard ConRAD 30.10.18 08:15
Re: Dynamo Voltage (possible) Hazard derSammy 30.10.18 08:44
Re: Dynamo Voltage (possible) Hazard kangaroo 23.10.19 09:50
Re: Dynamo Voltage (possible) Hazard ConRAD 10.02.20 10:57
Re: Dynamo Voltage (possible) Hazard kangaroo 14.05.20 09:43
Re: Dynamo Voltage (possible) Hazard AndreMQ 14.05.20 22:21
Re: Dynamo Voltage (possible) Hazard ConRAD 16.05.20 17:19
Re: Dynamo Voltage (possible) Hazard AndreMQ 16.05.20 19:17
Re: Dynamo Voltage (possible) Hazard ConRAD 20.05.20 19:49
Re: Dynamo Voltage (possible) Hazard AndreMQ 21.05.20 05:33
www.bikefreaks.de